Q: How is my decal made?
A: All the decals are made using a vinyl plotter or cutter. The design or logo is cut into a sheet of colored vinyl using a swivel knife that moves back and forth on plotted lines translated by the machine into the design shape. We then add a layer of transfer tape (the clear or translucent part) that becomes useful in applying your decal.
Q: How does the sizing work?
A: Sizing. Size refers to the dimension that is the longest, either height or width. In this way, you control the long dimension and the other will be less, but still in proportion. Square decals have the same width as height. If you need to know the exact dimensions, just contact us.
Q: What are 'Die-Cut' Decals?
A: Die-Cut' simply means, that the decal is 'cut out' into the shape or design. If you have chosen white vinyl color for your decal then, Only the part of the image that is white, will be the decal. There is not a white background.
Q: How do I apply or install the decals?
A: Our decals are simple to install, even the large ones. Always clean your surface or window before applying your decals. There are a total of 3 layers to the product. 1: the transfer layer (clear or opaque part); 2: the vinyl decal (your design in your color); 3: the backing paper (white or blue part).
Q: How do I remove the decals?
Q: How is 'Die-Cut' different than 'Printed' vinyl?
A: 'Die-Cut' is different then 'Printed' Die Cut Vinyl is cut into a single color only, and not printed into a full color spectrum, like a computer printer.
Q: Where can I apply my decals?
A: Our decals are made with the intent on being installed on the exterior of car windows, car doors, or any part of the vehicle, however you may apply your decals to any smooth or flat surface like walls, furniture and windows . You can even apply them on the inside of a window. It is a good idea to position your decal in your desired spot first, using tape, prior to installing it. This will allow you to get an idea of what it will look like before you permanently fix it to your surface.
Q: Will my windshield wipers effect my decals?
A: Not at all. As long as you cleaned your surface prior to applying your decal, then the decal should have no reason to not be securely adhered to your surface. It will be unaffected by your wiper blades.
Q: Can the decals go through a car wash?
A: Definitely! Although you might want to wait a few days after applying the decal before the first wash.
Q: What if I have air bubbles after installing my decal?
A: Not to worry. A day or two in the sun and they should come out on their own. You may need to help push them out with your fingertip. You can also use a pin to make a small hole and let the air escape.
Have a question about your decals? 92% of customers have found an answer on our Decal FAQ page. If you still did not find what you are looking for on our FAQ page, let us know how we can help by using the form below.